A standard Indian FTR already has presence. It sits tall, carries its flat-track influence openly, and looks more mechanical than polished. Add a custom Pro-Race GP-R2 with a carbon fibre finish, and the whole bike shifts from aggressive roadster to something darker, more focused and more track-minded.

This kind of build works because the FTR has the right base. The exposed frame, compact tail, muscular tank and wide stance can handle a bold exhaust treatment without looking overworked. A carbon fibre GP-R2 gives the bike a smaller visual footprint near the rear, while adding texture and contrast against the metal, paint and rubber.

Why the FTR suits the GP-R2

The Indian FTR is not a delicate bike. It has a broad tank, strong shoulders and a stance that feels closer to a street tracker than a conventional naked motorcycle. That makes it a good match for a short, motorsport-inspired exhaust.

The GP-R2 brings three things in visual terms:

  • A shorter can
  • A more compact rear profile
  • A finish that draws attention without adding bulk

On the FTR, that matters. A long, heavy-looking exhaust can pull the eye backwards and make the bike feel stretched. A shorter custom GP-R2 keeps the rear section tight. The carbon fibre finish then adds a technical surface that feels at home next to the FTR’s frame, engine cases and suspension hardware.

The best part is the balance. The bike still looks like an Indian FTR. It does not become a copy of a race bike or an overbuilt showpiece. The exhaust simply gives the original design more focus.

Indian FTR with a custom Pro-Race GP-R2 exhaust with a carbon fibre finish

What the carbon fibre finish changes

Carbon fibre carries a strong visual message. It suggests low weight, performance and heat resistance, even before anyone hears the bike run. On a custom FTR, the finish also helps break up the mass around the engine and swingarm.

It catches the light, shows the weave clearly and gives the exhaust a premium edge, while still sitting comfortably next to black wheels, dark frames and understated paint. It does not shout. It suits the bike’s rugged character and avoids making the exhaust look like a decorative add-on.

Small details have a large effect:

  • Carbon fibre sleeve – technical and premium, without adding visual weight
  • Black hardware – keeps the build stealthy
  • Short outlet – gives a race-inspired look

Getting the proportions right

With a custom exhaust, proportion matters more than size alone. A can that is too short can look unfinished. A can that is too long can spoil the FTR’s tight rear line. The GP-R2 shape works best when it follows the natural angle of the subframe and does not hang too low.

The exit angle is especially important. If the outlet points slightly upward, the bike gains a leaner, faster stance. If it points too high, the build starts to feel forced. Keeping the exhaust close to the bike’s body helps the FTR retain its compact silhouette.

Mounting hardware should also look considered. A visible bracket is not a problem, as long as it suits the rest of the bike. A neat black bracket can disappear into the frame. A raw metal bracket can look good if the build uses similar finishes elsewhere. Poor alignment, exposed gaps or random fasteners will distract from the carbon fibre work quickly.

A good custom exhaust should look like it belongs there, even if it is clearly not stock.

Finishing the build around the exhaust

Once the exhaust becomes a focal point, the rest of the bike should support it. That does not mean adding carbon to every panel. Too much matching material can make a build look busy. The stronger approach is to repeat the tone, not the exact texture.

Black levers, dark bar-end mirrors, smoked indicators and a tidy tail can all support the carbon fibre GP-R2 without overwhelming the bike. A small flyscreen or number-board style front piece can also work, especially if the build leans into the FTR’s flat-track roots.

Tyres and wheels influence the final character too. Road-biased tyres make the bike feel more modern and precise. More aggressive tread keeps the tracker attitude. Both can work, but the exhaust should feel part of the same story.

The key is restraint. The Indian FTR custom GP-R2 with carbon fibre finish is most effective when the exhaust looks intentional, not isolated. A clean tail, well-chosen hardware and careful alignment will do more for the build than a long list of extra parts.

The takeaway

A custom GP-R2 with a carbon fibre finish is a strong match for the Indian FTR because it plays to the bike’s existing strengths. It tightens the rear profile, adds a technical texture and gives the motorcycle a more focused edge.

The best version is not the loudest or the most dramatic. It is the one that respects the FTR’s proportions, keeps the installation clean and makes the bike look ready to ride rather than merely ready to display. When the carbon fibre finish, outlet angle, sound and surrounding details all work together, the result feels purposeful from every angle.

Want a Pro-Race exhaust for a bike we don’t list? Our custom work service builds exhausts for any make and model – get in touch to start your project, or see the full Pro-Race range.

More stories

Pro-Race GP-S1 slip-on exhaust for the Triumph Speed Triple 1200 RS and RR

Why the GP-S1 Remains the Best Selling Slip-On for the Triumph Speed Triple 1200RS/RR

Why the Pro-Race GP-S1 is still the slip-on Triumph Speed Triple 1200 RS and RR owners choose – the fit, finish, sound and proportions that copies can’t match.

Triumph Trident 800 with the Pro-Race GP-RX titanium slip-on exhaust

Pro-Race GP-RX Titanium Exhaust Arrives for the Triumph Trident

The Pro-Race GP-RX Titanium slip-on is now available for the Triumph Trident 800 – a short, race-style titanium can that cleans up the rear of the bike and brings out the character of the triple.